Twitter Facebook Google Plus Linked in

This article is for informational purposes only and no longer being updated by Seagate.

Change the battery in the F800 RAID array.

Change the battery in the F800 RAID array.


The LaCie F800 uses a small battery to retain several settings. Over time, all batteries fail and require replacement. The LaCie F800 uses a Maxell CR2032 3V, Mitsubishi CR2032E 3V or compatible battery. The procedure below demonstrates the proper method to change the battery:

 

STEP 1 - Disconnect all cables from the F800. Remove the 4 silver screws around the fan opening. DO NOT remove the black rivets.

STEP 2 - Locate the battery on the circuit board.

STEP 3 - Press the tab to remove the battery. Replace it with a new battery. Reverse the process to reassemble.